My Cart

Blog

Should I Use Plumbers Putty or Gasket for Sink Drain Installing

Should I Use Plumbers Putty or Gasket for Sink Drain Installing

Should I Use Plumbers Putty or Gasket for Sink Drain Installing - Blog - 1

The sink drain is quite an important part of the sink itself, especially if you want the sink to hold water. While it may not be as critical in a bathroom sink, the sink drain is critical in a kitchen sink because many people don’t fill their sink with water in the bathroom.

As you sift through the drain material and skim over the instructions, you may notice a rubber gasket in the kit. Should you use plumbers putty or gasket for sink drain when you are installing?

Which one should I use: plumbers putty or gasket for sink drain?

Plumbers putty or gasket for sink drain? That is a question. Generally speaking, it is better to use a rubber gasket on a sink drain than a plumber’s putty. Why? Well, you probably use boiling water and reasonably cold water in your sink, whether you are washing dishes, fetching water, or rinsing vegetables.

While a plumber’s putty holds up well, it doesn’t perform well in drastic temperature changes. Over time, it can start to break due to temperature fluctuations, rendering the seal (which is its entire purpose) useless. It does well at the bottom of taps and other areas that don’t experience severe temperature fluctuations, but not necessarily on drains.

Should I Use Plumbers Putty or Gasket for Sink Drain Installing - Blog - 2

In addition, many brands of plumber’s putty are not suitable for use on granite sinks. This is because plumber’s putty contains oils that may seep into the granite and cause stains. If you are unsure if the putty is safe for granite, check the packaging or the brand website.

If you have a stainless steel sink, make sure you can use a plumber’s putty. Generally, the packaging should clearly state whether you should not use this putty or not. Plumber’s putty can also damage plastic products, so if you have a plastic sink drain assembly, look for a replacement.

Therefore, when it comes to plumbers putty or gasket for sink drain, if the sink drain assembly comes with a rubber gasket, use that gasket. Rubber washers tend to last much longer than plumber’s putty, especially under extreme temperature fluctuations caused by running water.

When Not To Use Plumber’s Putty

There are a number of situations where you should not use a plumber’s putty. Although it is suitable for a variety of situations, it is not foolproof, so use it with care. As we mentioned above, be careful about using it on stone sinks and specific stainless steel sinks.

Here are some situations where plumber’s putty should not be used

  • Sealing joints between threaded pipes (metal or plastic)
  • Connecting unthreaded plastic pipes

Why not? Plumber’s putty can damage plastic, but it is also not meant to be used as glue. It is a sealant, so avoid using it as an adhesive (it usually does not work well).

What Can I Use Instead Of Plumber’s Putty?

Should I Use Plumbers Putty or Gasket for Sink Drain Installing - Blog - 3

If you want to find an alternative sealant to plumber’s putty, you have several options, including.

  • Foam gaskets
  • Rubber gaskets
  • Silicone caulk

If the sink drain assembly comes with a foam or rubber gasket, use that gasket. While a plumber’s putty may be cheaper for a quick fix, it may not last as long, especially if the temperature is constantly fluctuating (e.g. washing dishes in boiling hot water and then getting a glass of cold water).

Or, if you want a similar sealant (in the sense that it’s not a gasket of sorts), use silicone caulk. It’s a bit tricky to work with, but it’s usually easier to hold onto than a plumber’s putty. You can’t use the Rubbermaid work skills you’ve honed since you were a kid to roll putty snakes, as the application process is different, but you may reap the benefits of longer-lasting results.

Can I Use Plumber’s Putty On A Rubber Seal?

Should I Use Plumbers Putty or Gasket for Sink Drain Installing - Blog - 4

Plumbers putty or gasket for sink drain? Technically you can use a plumber’s putty on a rubber gasket (as long as it is approved for use on rubber). However, if you are assembling a new sink drain assembly, it really doesn’t make sense, especially if it has its own proper rubber gasket. It’s a bit redundant as you’re adding sealant to something that already needs to be sealed.

Prev:

Next:

Leave a Reply